June 14, 2005
So what kind of beer kit should you buy? Like anything else, it depends on what kind of beer you like. Stouts, pale ales, bitters, nut brown ale. For my part, I'm going to pick a nice, crisp, refreshing beer, one that will quench my summertime thirst. I'm not usually in the mood for a Guinness just after I've mowed the lawn. To that end, I've decided to brew my next beer using Coopers Draught malt extract kit. It comes in a 3.75 pound can, which isn't sufficient for a 5-gallon batch, meaning that I'll have to buy two. On to the next ingredient.
To magically transform malt sugar into alcohol, you're going to need yeast. Once again, we'll take the path of least resistance and use dried yeast. It's economical and easy to use. I've had good success using both Coopers Ale yeast and Doric ale yeast. The Munton's Ale yeast worked okay, too, but I've had more success with the other two. I recommend the Coopers Ale yeast because it ferments fairly well, even if the temperature climbs up out of the optimal range, which is certainly possible during the summer months.
The next ingredient is obvious: water. What may not be obvious, though, is that you shouldn't use plain old water straight out of the tap. Most municipal water systems are chlorinated and that stuff will make your beer taste like a child's wading pool. However, if your water is charcoal-filtered, you're all set. You could purchase 5-gallons of drinking water(not distilled) from the grocery store if you like, but I think it's unnecessary. Up to you, of course.
After your beer has fermented and you're ready to bottle, you'll have to add a little bit more yeast food to the beer so that it will carbonate in the bottle. So you'll need a little bit of corn sugar, about 3/4 cup or so. This is NOT table sugar and you won't find it in your grocery store. Just add it to your shopping cart when you're purchasing your other ingredients at the local homebrew supply shop.
Optional ingredient: some hop pellets for aroma/flavoring.
The kit you'll buy contains hops already, but these are bittering hops. There will be essentially no hop aroma from this kit unless you add some of your own. If you enjoy a nice hoppy aroma, you might consider tossing in 1/2 ounce of Cascade hop pellets. They have a great floral, citrusy aroma, which I really enjoy. Again, though, it's not necessary. Completely up to you.
1) 2 x 3-4 pound cans of any hopped malt extract beer kit. I've chosen Coopers Draught kit for my brew; it comes in a 3.75 pound can.
NOTE: If your kit comes in a 6-7 pound can, you will only need one can. Just an FYI.
2) 5-gallons of water, with all of that nasty chlorine filtered out.
3) 1 package dried ale yeast, purchased separately from what's included with your beer kit
4) Optional: 1-ounce packet of Cascade hop pellets.
88 queries taking 0.0993 seconds, 170 records returned.
Powered by Minx 1.1.6c-pink.